eryar

PipeCAD - Plant Piping Design Software.
RvmTranslator - Translate AVEVA RVM to OBJ, glTF, etc.
posts - 603, comments - 590, trackbacks - 0, articles - 0

AVEVA Model Data Exchange ChangeLog

Posted on 2013-09-11 18:41 eryar 阅读(7200) 评论(28)  编辑 收藏 引用 所属分类: 4.AVEVA Solution3.RvmTranslator

配置方法见程序文档说明或:http://www.cppblog.com/eryar/archive/2013/05/01/199875.html


 


RvmTranslator2.1  [20150818]
----------------
1. Improve performance for STEP translation;
2. Finish parse all the primitive shapes in RVM file;


RvmTranslator2.0  [20150504]
----------------
1. Thanks to SudoSky, RvmTranslator can parse binary RVM files.


RvmTranslator1.0  [20150422]
----------------
RvmTranslator - Translate PDMS RVM to STEP, IGES, STL, etc.
1. Standalone program to export PDMS model to STEP, IGES, STL .etc. by RVM file.
2. The RvmTranslator only rely on RVM file, it has no relation with PDMS SP12.0 or SP12.1.
3. The RvmTranslator only can parse ASCII text RVM files.

 


RvmTranslator Usage:


Download:

Version

Download

RvmTranslator1.0

Download

RvmTranslator2.0

Download

RvmTranslator2.1

Download


2014-07-13
==========
ModelDataExchangeAddin V1.2

1. Update the ModelDataExchangeAddin to AVEVA 12.1;

Download:

 



2014-03-20
==========
ModelDataExchangeAddin V1.1

1. Skip null Catref of Nozzles;
2. Skip some zero primitives shapes;

 

 

2013.09.11
========
1. 可以导出设备模型(Export equipment model);
2. 可以导出管路模型(Export pipe model);

image

Figure 1.1 Pipe and equipment models in PDMS

image

Figure 1.2 Pipe and equpment models exported by ModelDataExchange in Google SketchUp

Feedback

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2013-09-16 18:43 by Rafique Gazalli
I am very interested to see this magic....

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2013-09-16 18:49 by Rafique Gazalli
I am very interested to see this magic ....

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2013-09-16 20:34 by eryar
Hi, Rafique Gazalli:
You can download this .Net Addin to have a try, enjoy!
:-)
@Rafique Gazalli

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2013-09-22 21:48 by shan
能完整导入CAD么?包括壁厚信息等

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2013-09-22 22:01 by eryar
只要壁厚定义了,就可以,但是如果只看看管子模型,壁厚导出并显示出来的意义不大。
现在是全部导出,没有考虑Representation level,保温效果什么的都可以导出
@shan

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2013-09-24 15:40 by shan
你有qq或者其他联系方式么?想私聊,我的qq 119828528
谢谢

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2013-09-24 22:35 by eryar
一般邮箱:eryar(at)163.com
QQ已加,
@shan

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2013-10-08 14:22 by sopot
2013.09.11
========
1. 可以导出设备模型(Export equipment model);
2. 可以导出管路模型(Export pipe model);

这个版本在哪里能下载到?想尝试一下

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2013-10-11 23:44 by eryar
现在还没有编译一个Release版本的出来,若想试用,请email联系。
有时间发布一个Release试用版本。
@sopot

# re: AVEVA Model Data Exchange ChangeLog[未登录]  回复  更多评论   

2014-10-21 12:26 by Wang
v1.1在PDMS Sample项目的/STABILIZER模型中导出/Pipes报错:Element SCOMPONENT /CAVABDRRR does not have attribute DESP
Aveva.Pdms.Utilities.Messaging.Implementation.PdmsExceptionImpl: 应用程序中的错误。

另外导出的StL模型面太多,很难实用。

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2014-10-21 17:35 by eryar
@Wang
Hi Wang,

你好!

感谢你的反馈,Sample也是我的测试工程,其中这个SITE的PIPE大部分都已经通过测试。我再试试看你的这个模型。

导出的STL面多,模型显示更细腻、精确,可以考虑加个精度设置。

# re: AVEVA Model Data Exchange ChangeLog[未登录]  回复  更多评论   

2015-03-05 11:09 by leo
您好!我用的是12.1sp2,导出的时候,程序无响应,然后退出了,尝试了很多次,是什么原因呢?

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-03-05 19:19 by eryar
@leo

Hi leo,

你是用的哪个版本?是ModelDataExchangeAddin V1.2这个版本不?
12.1需要用这个版本的。

Best Regards,
Shing Liu

# re: AVEVA Model Data Exchange ChangeLog[未登录]  回复  更多评论   

2015-03-11 15:04 by leo
@eryar
Hi eryar,

我用的是V1.2的,cmd窗口有这样的提示,看不懂了,需要您的帮助:

AVEVA PDMS Design Mk12.1.SP2.0[3043]

***WARNING*** No schematic database present - Schematic 3D Integrator not initial
ised
Warning: Failed to load addin assembly E:\AVEVA\Plant\PDMS12.1.SP2\ModelChangesAd
din.dll
Addin assembly E:\AVEVA\Plant\PDMS12.1.SP2\ModelChangesAddin.dll could not be fou
nd
Unhandled Exception:

????????????????

System.Reflection.TargetInvocationException

Stack Trace:
?? System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] argume
nts, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle t
ypeOwner)
?? System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] argumen
ts, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner
)
?? System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeA
ttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibil
ityChecks)
?? System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeA
ttr, Binder binder, Object[] parameters, CultureInfo culture)
?? Aveva.ApplicationFramework.Presentation.Command.Execute(ArrayList arguments
)
?? Aveva.ApplicationFramework.Presentation.Command.CancelableExecute(ArrayList
arguments)
?? Aveva.ApplicationFramework.Presentation.ButtonToolImpl.FireToolClick()
?? Aveva.ApplicationFramework.Presentation.CommandBarManagerImpl._toolbarManag
er_ToolClick(Object sender, ToolClickEventArgs e)
?? Infragistics.Win.UltraWinToolbars.UltraToolbarsManager.OnToolClick(ToolClic
kEventArgs e)
?? Infragistics.Win.UltraWinToolbars.UltraToolbarsManager.FireEvent(ToolbarEve
ntIds id, EventArgs e)
?? Infragistics.Win.UltraWinToolbars.ToolBase.OnToolClick()
?? Infragistics.Win.UltraWinToolbars.ButtonToolUIElement.DoClickProcessing(Mou
seEventArgs e)
?? Infragistics.Win.UltraWinToolbars.ButtonToolUIElement.OnMouseUp(MouseEventA
rgs e)
?? Infragistics.Win.ControlUIElementBase.ProcessMouseUpHelper(Object sender, M
ouseEventArgs e)
?? Infragistics.Win.ControlUIElementBase.ProcessMouseUp(Object sender, MouseEv
entArgs e)
?? Infragistics.Win.Utilities.ProcessEvent(Control control, ProcessEvent event
ToProcess, EventArgs e)
?? Infragistics.Win.UltraControlBase.OnMouseUp(MouseEventArgs e)
?? Infragistics.Win.UltraWinToolbars.UltraToolbarsDockArea.OnMouseUp(MouseEven
tArgs e)
?? System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int
32 clicks)
?? System.Windows.Forms.Control.WndProc(Message& m)
?? System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
?? System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
?? System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr w
param, IntPtr lparam)
E:\AVEVA\Plant\PDMS12.1.SP2\des.exe : A fatal error has been detected.
The program must exit.

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-03-11 19:29 by eryar
@leo
Hi leo,

你用过ModelDataExchangeAddin V1.1么?配置成功过不?

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-03-11 19:29 by eryar
@leo

AVEVA PDMS Design Mk12.1.SP2.0[3043]

***WARNING*** No schematic database present - Schematic 3D Integrator not initial
ised
Warning: Failed to load addin assembly E:\AVEVA\Plant\PDMS12.1.SP2\ModelChangesAd
din.dll
Addin assembly E:\AVEVA\Plant\PDMS12.1.SP2\ModelChangesAddin.dll could not be fou
nd
Unhandled Exception:

????????????????
看上面的报错,应该是没有正确配置所致。

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-03 10:17 by pdms
hi eryar. This is free or commercial software?

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-06 19:29 by eryar
@pdms
Hi pdms,

you can download the Addin to check its license.
The Addin is free.

Best Regards,
Shing Liu

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-10 17:45 by MOhamed Auswath Khan
Hi Eryar ,

Thank you for uploading such a good addin.

I am the usee of PDMS version 12.0SP6 and 12.SP4.

I can able to export the model form the 12.0SP6 with the help of Addin version 1.1 .

But when i load the addin v1.2 for PDMS 12.1SP4.

I could not able to do and i can see the following error in the PDMS console.


PLEASE give your valuable replay to this such that i can start using this in PDMS 12.1SP4.

In addition is there any chance to export complete Site or Zone from the PDMS.


eRROR,

System.Reflection.TargetInvocationException Stack Trace: ?? System.RuntimeMethodHandle._InvokeMethodFast (Object target, Object [] argume nts, SignatureStruct & SIG, MethodAttributes MethodAttributes, RuntimeTypeHandle t ypeOwner) ?? System.RuntimeMethodHandle.InvokeMethodFast (Object target, Object [] argumen TS, Signature SIG, MethodAttributes MethodAttributes, RuntimeTypeHandle typeOwner ) ?? System.Reflection.RuntimeMethodInfo.Invoke (Object obj, BindingFlags invokeA ttr, Binder Binder, Object [] parameters, CultureInfo Culture, Boolean skipVisibil ityChecks) ?? System.Reflection.RuntimeMethodInfo.Invoke (Object obj, BindingFlags invokeA ttr, Binder Binder, Object [] parameters, CultureInfo Culture) ? ? Aveva.ApplicationFramework.Presentation.Command.Execute (ArrayList arguments ) ?? Aveva.ApplicationFramework.Presentation.Command.CancelableExecute (ArrayList arguments) ?? Aveva.ApplicationFramework.Presentation.ButtonToolImpl.FireToolClick () ?? Aveva.ApplicationFramework.Presentation. CommandBarManagerImpl._toolbarManag er_ToolClick (Object Sender, ToolClickEventArgs e) ?? Infragistics.Win.UltraWinToolbars.UltraToolbarsManager.OnToolClick (ToolClic kEventArgs e) ?? Infragistics.Win.UltraWinToolbars.UltraToolbarsManager.FireEvent (ToolbarEve ntIds ID, EventArgs e) ?? Infragistics. Win.UltraWinToolbars.ToolBase.OnToolClick () ?? Infragistics.Win.UltraWinToolbars.ButtonToolUIElement.DoClickProcessing (Mou seEventArgs e) ?? Infragistics.Win.UltraWinToolbars.ButtonToolUIElement.OnMouseUp (MouseEventA RGS e) ?? Infragistics.Win.ControlUIElementBase.ProcessMouseUpHelper (Object Sender, M ouseEventArgs e) ?? Infragistics.Win.ControlUIElementBase.ProcessMouseUp (Object Sender, MouseEv entArgs e) ?? Infragistics.Win.Utilities.ProcessEvent (Control Control, ProcessEvent Event ToProcess, EventArgs e) ?? Infragistics.Win .UltraControlBase.OnMouseUp (MouseEventArgs e) ?? Infragistics.Win.UltraWinToolbars.UltraToolbarsDockArea.OnMouseUp (MouseEven tArgs e) ?? System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons button, Int 32 Clicks) ?? System. Windows.Forms.Control.WndProc (Message & m) ?? System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m) ?? System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m) ?? System.Windows .Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr w param, IntPtr lparam) E: \ AVEVA \ Plant \ PDMS12.1.SP2 \ des.exe:. A fatal Error detected HAS Been MUST Exit The Program.

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-10 21:16 by eryar
@MOhamed Auswath Khan

Hi Mohanmed,

Thanks for your feedback. I am very happy that the addin can do something useful.

The Addin can export the SITE or ZONE if you select it, but the
export process maybe a little slowly.

I will check the addin v1.2 for PDMS 12.1SP4.

Best Regards,
Shing Liu

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-13 13:12 by MOhamed Auswath Khan
Hi Shing Liu,

Thank you for the quick replay ,

I am eager to use this in PDMS 12.1SP4 as most of our projects are running in this version.

I will be eagerly waiting for your post.


Thank You,

With regards,
Mohamed Auswath khan.Z

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-13 19:23 by eryar
@MOhamed Auswath Khan

Hi Mohanmed,

You are welcome.

Thanks for your attention, I will update the ModelDataExchangeAddin to 12.1 soon...

Best Regards,
Shing Liu

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-15 21:25 by MOhamed Auswath Khan

Hi Shing Liu,

Will be waiting for you replay

With regards,
Mohamed Auswath khan.Z

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-17 19:42 by eryar
@MOhamed Auswath Khan

Hi Mohanmed,

I will develop a standalone program to export PDMS model to STEP, IGES, STL .etc. by rvm file. The standalone program will have no relation with PDMS, no matter which version of PDMS you use, only rely on the rvm file exported by PDMS.

Best Regards,
Shing Liu

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-21 21:20 by MOhamed Auswath Khan
Hi Shing Liu,

You guys are doing excellent job.

Reducing the efforts of other 3rd party software.

I am waiting to test what you have explained in the above post

With regards,
Mohamed Auswath khan.Z

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-04-21 22:47 by eryar
@MOhamed Auswath Khan

Hi Mohamed,

Thank you.

I hope the application will be useful.

I will release the first version of RvmTranslator soon,
then you can download it and have a try...

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-06-30 19:09 by gopi
hi,
i used rvm translator 2 and found it is working and can read the files.
I have a doubt can exported item is treated as a single entity. Can we make it as multiple entities like pipe, flange, elbow, etc when we select

# re: AVEVA Model Data Exchange ChangeLog  回复  更多评论   

2015-06-30 19:28 by eryar
@gopi

Hi gopi,

Thanks for your feedback.

RvmTranslator is used to translate the geometry model in RVM files, because the export result are STEP, IGES, STL, .etc format, such as STL only contains model mesh, do not contains assembly info, so if you want to export as a multiple entities, will be result many files per entity.

Best Regards,
Shing Liu

只有注册用户登录后才能发表评论。
网站导航: 博客园   IT新闻   BlogJava   知识库   博问   管理