posts - 431, comments - 579, trackbacks - 0, articles - 0

1.PipeCAD

The IsoAlgo means the Piping Isometric Drawing Algorithm which can be used to generate the isometrics for pipeline. It reads Piping Component File(PCF) and generates the piping isometric drawing in DXF format. IsoAlgo3d - A PCF 3D Viewer for Desktop, Tablet and Smart phone.

PipeCAD Import IDF

     摘要: 今天发布一个PipeCAD版本，主要功能是可以导入IDF/PCF文件后进行三维显示。  阅读全文

posted @ 2019-08-11 22:45 eryar 阅读(558) | 评论 (0)  编辑 |

PipeCAD 简介

     摘要: PipeCAD的定位是中小型项目的管道设计软件，主要有管道建模、设备建模以及管道ISO图及平面图功能。程序的操作方式尽量参考PDMS，考虑灵活性、易于使用。如果用来和国内其他管道设计软件来对比，主要优势就是基于独立图形平台，不依赖第三方图形平台如AutoCAD，程序安装好即可运行。  阅读全文

posted @ 2019-07-24 23:28 eryar 阅读(488) | 评论 (0)  编辑 |

PipeCAD之管道标准库PipeStd(3)

     摘要: 管道标准部件库程序PipeStd的思路与PDMS的Paragon类似，主要也是采用参数化的方式来表示管件。在PipeStd中定义好管件的参数化模型及管道等级数据后，就可以为后面管道的建模打好基础。
程序主要用C++开发，所以可以跨平台运行，即可以在Linux系统中运行，也可以在Windows系统中运行。  阅读全文

posted @ 2019-07-15 19:04 eryar 阅读(401) | 评论 (0)  编辑 |

PipeCAD之管道标准库PipeStd

     摘要: PipeCAD之管道标准库PipeStd，来对管件及管道等级Piping Specification数据进行管理。  阅读全文

posted @ 2018-11-25 22:27 eryar 阅读(834) | 评论 (2)  编辑 |

IsoAlgo3d三维管道软件

     摘要: IsoAlgo3d三维管道软件主要用于将目前国际主流管道设计软件AVEVA PDMS和Intergraph SmartPlatn3D等软件导出的IDF/PCF文件进行三维模型重建，并在此基础上定制开发管道材料统计、管子零件设计、管子零件图功能。 　　在导入IDF/PCF后，可在三维模型对焊点信息进行编辑，即重新生成管子零件，方便管道预制车间进行管子零件处理。即拿到设计院的IDF/PCF后，可以直接在IsoAlgo3d中进行三维浏览，与在管道设计软件中显示一样的三维模型。不需要再拿着轴测图来描图等麻烦的手工画图，提高效率。  阅读全文

posted @ 2018-09-15 22:44 eryar 阅读(1287) | 评论 (0)  编辑 |

IsoAlgo3d - IDF/PCF pipeline 3d viewer

     摘要: 当前国际主流管道设计软件都可以生成IDF/PCF文件，这两种文件格式都是用于Isogen生成管道轴测图。其中IDF为ISOGEN Data File，主要来自Intergraph PDS 和AVEVA PDMS。PCF为Piping Component File，主要来自Intergraph SmartPlant 3D和CADWorx。 IsoAlgo3d可以对IDF/PCF进行三维浏览。  阅读全文

posted @ 2018-09-11 22:17 eryar 阅读(733) | 评论 (0)  编辑 |

船舶管子零件图程序开发

     摘要: 船舶管子零件图,PipeSketches  阅读全文

posted @ 2017-12-16 20:33 eryar 阅读(944) | 评论 (0)  编辑 |

IsoAlgo3d - A PCF 3D Viewer for Desktop, Tablet and Smart phone

     摘要: Abstract. IsoAlgo3d 通过将PCF三维可视化，并导出HTML文件。由于使用WebGL技术，所以只要设备支持HTML5，就可以不用安装任何软件或插件直接浏览PCF对应的全尺寸标注的管道三维模型，不管是电脑、平板还是智能手机。三维直接浏览管道模型，更加直观，避免了二维ISO图有时表达不清晰的情况，如环管出图，复杂管线分图后识图困难等，方便现场施工。

Key Words. IsoAlgo3d, 管道ISO图，三维管道图，WebGL, 平板，手机  阅读全文

posted @ 2017-11-04 19:05 eryar 阅读(1121) | 评论 (0)  编辑 |

PcfTranslator - Translate AVEVA PDMS to PCF

     摘要: Abstract. The Piping Component File(PCF) are text files containing component and routing information. The PCF format was originally developed as an easy way to drive Isogen, the syntax is simple which means it is straightforward to create from most piping design software. But AVEVA PDMS only can export IDF format, PcfTranslator can translate AVEVA PDMS piping model to PCF, you can use the PCF in IsoAlgo for piping isometrics drawing or IsoAlgo3d to visualize the 3d model. You can also import the  阅读全文

posted @ 2017-02-16 22:41 eryar 阅读(2250) | 评论 (0)  编辑 |

IsoAlgo3d - PCF format 3d visualization tool

     摘要: IsoAlgo3d is a PCF format 3d visualization tool. I publish it on github to open the source code. Its license is GPL, you can use the IsoAlgo3d freely.

https://github.com/eryar/IsoAlgo3d

You can download the source code and contribute your modification.
  阅读全文

posted @ 2016-06-16 23:21 eryar 阅读(1259) | 评论 (0)  编辑 |

IsoAlgo - PCF Viewer

     摘要: The IsoAlgo means the Piping Isometric Drawing Algorithm which can be used to generate the isometrics for pipeline. It reads Piping Component File(PCF) and generates the piping isometric drawing in DXF format.   阅读全文

posted @ 2016-04-25 22:28 eryar 阅读(706) | 评论 (0)  编辑 |

IsoAlgo2.0 is released!

posted @ 2016-01-29 22:58 eryar 阅读(1192) | 评论 (0)  编辑 |

IsoAlgo2.0 Preview

posted @ 2015-10-15 21:02 eryar 阅读(1080) | 评论 (2)  编辑 |

IsoAlgo3d - A PCF 3D Viewer

     摘要: IsoAlgo3d - A PCF 3D Viewer.  阅读全文

posted @ 2015-08-06 22:46 eryar 阅读(2149) | 评论 (2)  编辑 |

OpenCASCADE Documentation System

     摘要: Abstract. Doxygen is the de facto standard tool for generating documentation from annotated C++ sources, but it also supports other popular programming languages. You can also use doxygen for creating normal documentation, as OpenCASCADE did for its references and user’s guide documents.

Key Words. OpenCASCADE, Doxygen, Documentation System  阅读全文

posted @ 2014-09-10 22:30 eryar 阅读(1824) | 评论 (0)  编辑 |

IsoAlgo GUI Usage

     摘要: Abstract. The GUI of IsoAlgo is made by Tcl/Tk. The usage is easy and simple, if you are familiar with Tcl/Tk, you can customize it by yourself. The paper focus on the usage for IsoAlgo GUI and the method to customize the IsoAlgo GUI.

Key Words. IsoAlgo, isogen, GUI, Tcl/Tk, Customization, PCF, DXF  阅读全文

posted @ 2014-09-03 20:43 eryar 阅读(1836) | 评论 (0)  编辑 |

IsoAlgo Split Drawing Info

     摘要: Abstract. When the isometric drawing is splited by split point, it should mark the continue drawing info
on the split point. You can also config the “CONT. ON” by the config file.
Key words. IsoAlgo, Split Drawing,

For more information about IsoAlgo, please visit: http://code.google.com/p/isoalgo/
Any feedback is welcome, please send email to the author: IsoAlgo@gmail.com.
IsoAlgo User Guide: http://www.cppblog.com/eryar/archive/2014/04/27/206735.html
  阅读全文

posted @ 2014-08-31 11:50 eryar 阅读(1067) | 评论 (1)  编辑 |

IsoAlgo Split Point Issues

     摘要: Abstract. The impossibility to define the splitting point makes it impossible to generate
the readable isometrics drawing in some cases. If the drawing is so crowded that can not
read it clearly, it should add the split point to the drawing.

Key Words. IsoAlgo, Isogen, Split Point  阅读全文

posted @ 2014-08-21 22:27 eryar 阅读(1430) | 评论 (2)  编辑 |

IsoAlgo Split Point

     摘要: Abstract.
The impossibility to define the splitting point makes it impossible to generate
the readable isometrics drawing in some cases. If the drawing is so crowded
that can not read it clearly, it should add the split point to the drawing.

Key words. IsoAlgo, Isogen, Split Point,
  阅读全文

posted @ 2014-07-20 15:11 eryar 阅读(1575) | 评论 (4)  编辑 |

How to split piping isometric drawing automatically?

     摘要: eryar@163.com


How to split piping isometric drawing automatically?

key words: IsoAlgo, Isogen, ISO-SPLIT-POINT, split automatically

当管道模型比较复杂时，生成的轴测图就会有重叠的现象，如何来消除重叠呢，一种有效的方式就是分图。
  阅读全文

posted @ 2014-07-02 19:54 eryar 阅读(1953) | 评论 (0)  编辑 |

Full 1.PipeCAD Archive