C++ Programmer's Cookbook

{C++ 基础} {C++ 高级} {C#界面,C++核心算法} {设计模式} {C#基础}

c#运算符重载和技巧 (equal()函数的实现使用)

Overview

Occasionally this question pops up in newsgroups and forums : Why does C# insist on operator overloads being static? The person raising the question also usually complains how this prevents him or her from implementing virtual overloaded operators.

This article explains why operator overloads have to be static in C# (or any other MSIL compiler), and also shows how you can simulate virtual overloaded operators very easily. It's not a universe-shattering theory (nor a very original one for that matter) and uses a very simple pattern though it's this very simplicity that makes it interesting.

So, why do they have to be static?

In C#, GC'd objects are heap-allocated (the managed CLR heap, not the CRT heap) and thus GC'd objects are always used as references (into the CLR heap). You cannot have stack-based GC'd objects in C# and what this means that you never know when an object variable is null. So, you can imagine what happens if operator overloads were instance methods and you tried to use an operator on a null object! Traditional C++ (as opposed to the CLI version) never faced this problem because the operators were always applied on stack objects; and if at all pointers were used, since pointers followed their own set of operational behavior - you never face a situation where an overloaded op-overload method is invoked on an invalid object.

Traditional C++ example

See below some C++ code that uses virtual operator overloads :-

class Base
{
public:
    Base(int x):x_value(x){}
    virtual bool operator ==(const Base& b)
    {
        return x_value == b.x_value;
    }
protected:
    int x_value;
};

class Derived : public Base
{
public:
    Derived(int x, int y): Base(x), y_value(y){}    
    virtual bool operator ==(const Base& b)
    {        
        Derived* pD = (Derived*)&b;
        return (pD->y_value == y_value) && (pD->x_value == x_value);
    }
private:
    int y_value;
};

int _tmain(int argc, _TCHAR* argv[])
{
    Base* b1 = new Derived(2,11);
    Base* b2 = new Derived(2,11);

    cout << (*b1==*b2) << endl;

    return 0;
}

When (*b1==*b2) is evaluated the == operator overload for class Derived is invoked which can be easily verified by trying out different values for the Base constructors for b1 and b2 or by setting a breakpoint inside the operator overload.

A port to C#

Taking what we know of C# let's attempt a straight-forward port of the above example to C#.

public class Base
{
    int x;

    public Base( int x )
    {
        this.x = x;
    }

    public static bool operator==( Base l, Base r )
    {
        if( object.ReferenceEquals( l, r ) )
            return true;
        else if( object.ReferenceEquals( l, null ) || 
                 object.ReferenceEquals( r, null ) )
            return false;
            
        return l.x == r.x;
    }

    public static bool operator!=( Base l, Base r )
    {
        return !(l == r);
    }

    public int X { get { return x; } }
}

public class Derived : Base
{
    int y;

    public Derived( int x, int y ) : base( x )
    {
        this.y = y;
    }

    public static bool operator==( Derived l, Derived r )
    {
        if( object.ReferenceEquals( l, r ) )
            return true;
        else if( object.ReferenceEquals( l, null ) || 
                 object.ReferenceEquals( r, null ) )
            return false;
        
        return (l.y == r.y) && (l.X == r.X);
    }

    public static bool operator!=( Derived l, Derived r )
    {
        return !(l == r);
    }

    public int Y { get { return y; } }
}

class Program
{
    static void Main()
    {
        Derived d1 = new Derived( 2, 11 );
        Derived d2 = new Derived( 2, 11 );

        Console.WriteLine( d1 == d2 );
        Console.ReadLine();
    }
}

If we run the program as it is above everything will work like the C++ version, but if we introduce a slight change to the program things begin to deviate greatly.

class Program
{
    static void Main()
    {
        Base d1 = new Derived( 2, 11 );
        Base d2 = new Derived( 2, 12 );

        Console.WriteLine( d1 == d2 );
        Console.ReadLine();
    }
}

What's going on here? As simple debugging will show us the despite the objects being compared being instances of the Derived class the Base class == operator is being called. This is because C# (and thus, most other languages) figure out which == operator method to call based on the known (i.e. compile-time) type of the object on the left hand side of the operation.

There are ways around this as you'll see below.

Simulating operator polymorphism with C#

Here, we see how to simulate this in C# :-

class Base
{
    protected int x_value = 0;    

    public Base(int x)
    {
        x_value = x;
    }

    public static bool operator==(Base b1, Base b2)
    {
        if( object.ReferenceEquals( b1, b2 ) )
        {
            return true;
        }
        else if( object.ReferenceEquals( b1, null ) || 
                 object.ReferenceEquals( b2, null ) )
        {
            return false;
        }
        
        return b1.Equals(b2);            
    }

    public static bool operator !=(Base b1, Base b2)
    {
        return !(b1 == b2);
    }

    public override bool Equals(object obj)
    {
        if( obj == null )
            return false;
        
        Base o = obj as Base;
        
        if( o != null )    
            return x_value == o.x_value;
        return false;
    }


    public override int GetHashCode()
    {
        return x_value.GetHashCode();
    }
}

class Derived : Base
{
    protected int y_value = 0;
    

    public Derived(int x, int y) : base(x)
    {
        y_value = y;
    }

    public override bool Equals(object obj)
    {
        if( !base.Equals( obj ) )
          return false; 
          
        Derived o = obj as Derived;
        
        if( o == null )
            return false;
        
        return y_value == o.y_value;
    }

    public override int GetHashCode()
    {
        return x_value.GetHashCode() ^ y_value.GetHashCode() + x_value;
    }
}

class Program
{
    static void Main(string[] args)
    {
        Base b1 = new Derived(10, 12);
        Base b2 = new Derived(10, 11);
        
        Console.WriteLine(b1 == b2);

        b2 = null;

        Console.WriteLine(b1 == b2);

        Console.ReadKey(true);
    }
}

Rather than rely on the == operator overload to do all of the heavy lifting we push all of the work onto the virtual Equals method, from there we let polymorphism work its magic.

Points to note

  • The operator overload has to be static, so we have virtual instance methods that implement the logic for us and we invoke these virtual methods from the static operators

  • In our example, the method Equals corresponds to == and Equals is a virtual method (inherited from System.Object)

  • Within the static overload we need to check for null (to avoid null-reference exceptions)

  • Within each derived class's corresponding operator-logic method (Equals in our case), we cast the System.Object argument to the type of the class (e.g. - In the Derived class we cast to Derived)

  • While Equals and == already exist in System.Object, we can implement similar methods for any operator in our class hierarchies. Say, we need to implement the ++ operator, we then add a PlusPlus (or Increment) virtual method to the root base class in our object hierarchy and in the ++ overload we invoke the Increment method on the passed-in object.

  • In our example, we check for null and return true or false depending on whether the objects are both null or not. But, if you are implementing an operator like ++ then you might want to check for null and throw an ArgumentNullException (to override the inappropriate NullReferenceException that'd otherwise get thrown).

History

  • Apr 19, 2005 : Article first published
  • Apr 20, 2005 : Fixed a bug in Derived.Equals and also changed the GetHashCode implementations for Base and Derived (thanks to Jeffrey Sax for pointing this out)

posted on 2006-03-14 12:35 梦在天涯 阅读(1893) 评论(0)  编辑 收藏 引用 所属分类: C#/.NET


只有注册用户登录后才能发表评论。
网站导航: 博客园   IT新闻   BlogJava   知识库   博问   管理


公告

EMail:itech001#126.com

导航

统计

  • 随笔 - 461
  • 文章 - 4
  • 评论 - 746
  • 引用 - 0

常用链接

随笔分类

随笔档案

收藏夹

Blogs

c#(csharp)

C++(cpp)

Enlish

Forums(bbs)

My self

Often go

Useful Webs

Xml/Uml/html

搜索

  •  

积分与排名

  • 积分 - 1783949
  • 排名 - 5

最新评论

阅读排行榜